Monogram Dishwasher Error Code F35
The F35 error code on a Monogram dishwasher indicates a diverting valve feedback error. The diverter valve is responsible for directing water to the wash, rinse, and dry sections of the dishwasher. If the diverter valve is not functioning properly, the dishwasher may not be able to complete the cycle correctly.
There are three possible causes of the F35 error code:
- Faulty diverter valve: The diverter valve itself may be damaged or malfunctioning. This can be caused by wear and tear, or by a power surge or other electrical issue.
- Wiring issue: The wiring between the diverter valve and the control board may be damaged or disconnected. This can be caused by physical damage, or by a loose connection.
- Control board malfunction: The control board may be malfunctioning and not sending the correct signals to the diverter valve. This can be caused by a power surge, or by a more serious internal issue.
If you see the F35 error code on your Monogram dishwasher, you can try the following troubleshooting steps:
- Check the diverter valve operation: Turn off the dishwasher and open the door. Inspect the diverter valve to make sure it is moving freely and smoothly. If the valve is not moving properly, it may need to be replaced.
- Check the wiring: Inspect the wiring between the diverter valve and the control board for any damage or loose connections. If you find any damage, you will need to repair or replace the wiring.
- Reset the dishwasher: Unplug the dishwasher for 30 seconds and then plug it back in. This can sometimes reset the control board and clear the error code.
If the error code persists after trying these steps, you will need to contact a qualified appliance repair technician.
Additional Information
The F35 error code is a system error, meaning that it can be caused by a problem with any of the components involved in the diverter valve system. This includes the diverter valve itself, the wiring, and the control board.
If you are not comfortable troubleshooting the F35 error code yourself, it is best to contact a qualified appliance repair technician.