Monogram Dishwasher Error Code CE

The CE error code on a Monogram dishwasher indicates a communication breakdown between components.

This can be caused by a variety of factors, including:

• Faulty wiring: The wires connecting the different components of the dishwasher may be damaged or corroded.
• Loose or disconnected wiring: The wires may be loose or disconnected at the connectors.
• Defective component: One of the components involved in the communication may be defective.

To troubleshoot the CE error code, you can try the following steps:

1. Power cycle the dishwasher: Unplug the dishwasher for 30 seconds, then plug it back in. This can sometimes reset the control board and clear the error code.
2. Check the wiring connections: Inspect all of the wiring connections between the different components of the dishwasher. Make sure that the wires are securely connected at all of the connectors.
3. Inspect the components: Inspect the components involved in the communication for any signs of damage or wear. If you find any damage, replace the component.

If you have checked all of the wiring connections and components and the error code persists, you may need to contact a qualified appliance repair technician.

Here are some additional details that you may want to include in your explanation:

• The communication between components in a dishwasher is essential for the proper operation of the appliance. The control board sends signals to the different components, telling them what to do. If there is a communication breakdown, the dishwasher may not be able to complete a cycle or may operate incorrectly.
• The wiring connections between the components are critical. The wires must be securely connected at all of the connectors to ensure that the signals are transmitted properly.
• The components involved in the communication can be damaged or defective. If a component is damaged, it may not be able to send or receive signals properly.